Operation

System parameter setting

• Short press the SET Key,ready to set system parameters: 

  • • decoding mode

    • output PWM frequency

    • output brightness curve

    • automatic black screen

    • Short press the M key to switch between four items

• Decode mode: 

  • short press or key to switch 1/2/3/4 channel decode mode("d-1","d-2" or'd-3"or"d-4")

  • When set as 1 channel decode, the decoder occupy only 1 DMX address, and four channel output the same brightness of this DMX address.

• Output PWM frequency:

  • Short press or to switch between:

    • 500Hz ("F-05")

    • 2KHz ("F- 20")

    • 4KHz ("F-40")

    • 8KHz ("F-80")

    • 16KHz ("F-16")

    • Higher PWM frequency results in lower output current higher power supply naise, but is more suitable for video shooting (flicker free).

Restore factory default parameter:

• Long press Set key for 2s,restore factory default parameter,display'RES". 

• Factory default parameter: 

  • DMX decode mode

  • DMX decode start address is 1

  • Four channel decode

  • 2000Hz PWM frequence output

  • Logarithmic brightness curve

  • Logarithmic brightness curve

  • RGB mode number is 1

  • Dimmer mode number is 1

  • Disable automatic blank screen