Embedded Files
6 output driver
6 output driver
Art-Net Pixel Driver
drive with any art-net softwareArt-Net Pixel Driver
i/o:
i/o:
- Input: Art-Net
- Output: 6 SPI [6x512parameters] or [6x170RGB] or [6x128RGBW]
- Protocols tested: WS2811, WS2812, WS2815, SK6812/P8
- Voltage: 5-24 VDC
- Power: 2x15A max [30A*5V=150W] or [30A*12V=360W] or [30A*24V=720W]
- no Fuses on PCB. Your PSU is the limiter!
Short RAnge:
Short RAnge:
- Data with Power up to 15m [driver to first pixel]
- 3x1.5mm^2 Pin wire suggested
- For shorter lengts 3x0.75mm^2 is very comfortable
- But please calculate cable size knowing Your power needs :)
Long RAnge:
Long RAnge:
- Differential output Pair for LongRange Data transmisiions - up to 250m
- use Dx and Df for Long range transmision
- must use together with RxTx board for receiveng data at the end and translate to SPI signal
- Power Your SPI/Addresable leds at the end of Line, to avoid Voltage drop!
- CAT-5/6 4 ports without grounding, 3 ports with grounding
Connectors:
Connectors:
- 2EDGK-5.08-03P - for short range
- 2EDGK-5.08-04P - for long range
Dimensions:
Dimensions:
- PCB:80x80x21mm
- Enclosure:120x95x21mm
- PixNet Finder
Download PixNetFinder V1.0 - 9MB
Searches thru all network interface for awailable PixNet Devices
Open and edit Pixnet settings in WEB Browser - Press on Found PixNets
- Latest update for 2nd software:
Download and upload via webserwer
PixNet 6 v0.2-dev3-no-art-seq.cfxfw
Release: 2025-02-06
ChangeLog:
Art-Net packets may be received in chaotic order
Works with Resolume
Page updated
Google Sites
Report abuse